Go slowly, particularly at first, to make sure the hole ends up where you want it. The tape not only makes it easier to mark the wall but also helps to keep the drill bit from skidding when starting the hole.Try to locate the hardware close to the center of the tile – the edges crack more easily.For accessories such as towel bars with two mounting brackets, use a level to make sure both sets of holes align.It’s easier to accurately mark the hole location on tape than on tile. First, adhere masking tape to the wall in the area where you’ll drill.They say to measure twice and cut once, but given the consequences of drilling a hole in a tile wall in the wrong place, it’s a good idea to measure three times and drill once. While that sounds expensive, a ¼ inch diamond tipped tip costs under $20, and a carbide bit of the same size can be had for less than $10. Ceramic tile can be drilled with a carbide bit, while glass and porcelain call for a diamond-tipped bit. Standard drill bits don’t work on tile, but not to worry. Step 2: Have the right bit for ceramic tile
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |